Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Help Identify this cartridge!


Recommended Posts

I’m running a Technics SL-B3 TT and need help identifying a cartridge.  I don’t want to screw w removing it if I don’t have to.

 

Just trying to make sure I got the loading on my Carver C-1 right.

 

Ive got it hooked up to Phono 1 w the infrasonic filter engaged.  Not a clue what loading to use for the cartridge so i think it’s set at the middle which I think is 140??

 

 

EAB963DA-8E95-475F-965E-7A9EDE474DC5.jpeg

F6598374-8880-41AC-A6E6-EE7FBE8EF410.jpeg

My system is a hodge lodge of a bunch of things right now.

 

The TT path is as follows

TT —> C-1 -> Anthem MRX 500 -> Soundstream D-1 monos -> AV123 ELT525T towers and a Polk MicroPro 2000 sub.

 

The rest of the gear bypasses the C-1 so it’s basixally a phono pre since my Anthem didn’t have a phono input.  The Carvers volume is about 50% as Greg said that’s where it’s closest to perfect level wise (or I think he said that sometime lol).

 

At 50% I feel like it’s fine.  I’ve got it really low on then Anthem right now and it’s perfect.

 

Listening to my Dads old LP collection!

EEA54C2D-2D2F-4B5F-A533-7A86FAD89ECB.jpeg

Edited by Bean
  • Thank You 2
Link to post
Share on other sites

Hope you find out what AT it is but it's time for me to get some learnin'. I thought you could switch between the load settings at will until you find what sounds best? Glad I haven't hooked my table up yet...?

Link to post
Share on other sites
Just now, pindrop said:

Hope you find out what AT it is but it's time for me to get some learnin'. I thought you could switch between the load settings at will until you find what sounds best? Glad I haven't hooked my table up yet...?


Maybe you can lol...... I haven't tried it since its working and from what I can tell I dont feel I'm "missing" anything...... It sounds DAMMMNED GOOD!  I forgot how good OLD Vinyl sounds.....

This is the first time I've hooked this up in about 2 years since I didnt have a phono pre.......

I just felt like playing with this as my Tube Console will be mated with this TT later when I get it recapped and modded to accept a external TT (rather than the built in one), as well as add a line level input for a chromecast audio....

Link to post
Share on other sites
7 minutes ago, Rod H said:

Looks like an AT331E


Well I dug into my old posts (knew I mentioned it somewhere). Its a AT11E 

 

rbgks8.jpg

Found that info here...... Wonder if its worth upgrading the cart or headshell or just leave it as is.... the TT works fine but dont want to put a lot of lipstick on a pig of a TT so to speak....
 

Edited by Bean
Link to post
Share on other sites
14 hours ago, Daddyjt said:

When I opened this thread, I was expecting to see something like this:

 

carry on...

 

 

 

FE2285C2-79B6-40E0-9844-C237467E514E.jpeg

 

Mark,  You've got me on pins and needles.  What is the cartridge?  I thought it was 7.62 x 54r, but the shape is wrong.  Inquiring minds want to know.

  • Thank You 1
Link to post
Share on other sites
8 minutes ago, PhilDent said:

 

Mark,  You've got me on pins and needles.  What is the cartridge?  I thought it was 7.62 x 54r, but the shape is wrong.  Inquiring minds want to know.


Its what Mark uses to clean out his ears with instead of cutips ?

  • Haha 1
Link to post
Share on other sites
47 minutes ago, PhilDent said:

 

Mark,  You've got me on pins and needles.  What is the cartridge?  I thought it was 7.62 x 54r, but the shape is wrong.  Inquiring minds want to know.

By the look of the radius in the neck of case tells me that it is a Weatherby case,  not sure on the caliber though.

Link to post
Share on other sites
2 hours ago, madmike46 said:

By the look of the radius in the neck of case tells me that it is a Weatherby case,  not sure on the caliber though.

 

Good eye Mike - it is a .257 Weatherby. Incidentally, the .257 was Roy’s favorite of all the cartridges he engineered. 

 

Sorry for the thread hijack @Bean

 

fyi @Sk1Bum

  • Thank You 2
  • That Rocks 1
Link to post
Share on other sites
  • 1 month later...

Ok guys, here is what I've got coming in to try.  A buddy is giving me a Grado Carbon Cartridge with needle.

 

img-gallery-cart-carbon-a.jpg

 

Here are the specs:

  • Output: 2.5mV at 1kHz
  • Stylus: User replaceable.
  • Fixing: Standard, two screws
  • Cantilever: Carbon
  • Colour: Black/White
  • Tracking Pressure 2-3g

 

Here are the specs of the AT11E for comparison

  • Generating element: dual moving magnet
  • Frequency response: 15-25000Hz
  • Output: 4.8mV
  • Channel balance: 1.5dB
  • Stylus shape: 0.4 x 0.7 mil elliptical
  • Stylus construction: bonded
  • Cantilever: thin wall
  • Tracking force: 1.5 to 2.5g
  • Cartridge weight: 5.5g

So I'm wondering what I need to put the loading on the C-1 as, and also if spec wise how this compares to the others.  I see differences in the numbers but dont know what that equates to honestly.

Once again the Turntable is a Techics SL-B3 and your help appreciated.

Link to post
Share on other sites

It’s stock.  Haven’t got to mods yet.

 

And if I'm looking at this right it might be worse than what I have now...

 

AT11E

Frequency response: 15-25000Hz

Output: 4.8mV

Channel balance: 1.5dB

Stylus shape: 0.4 x 0.7 mil elliptical

Cantilever: thin wall

Tracking force: 1.5 to 2.5g

Cartridge weight: 5.5g

Replacement stylus assembly: ATS11E (green)

 

Carbon

Frequency response: 20 to 20,000Hz

Output voltage: 3.5mV

Channel balance: within 2.5dB

Stylus: 0.6 mil

Cantilever: carbon

Tracking force: 1.5 to 2.5g

Weight: 5.0g

Replacement stylus: ATN-91

 

Edited by Bean
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...