Hal 17 Posted February 16 Share Posted February 16 Hello everyone. Just found this site today. Wish I had found it sooner, as I sent two units off for a "chassis refresh" a week ago. Hopefully I don't read that where I sent them off to was a mistake. Anyway, I purchased most of my Carver components around 1987 while I was single and in the military. Presently I own a C-1 preamp, M-1.5t amp, which drive a pair of Cerwin Vega AT-100's. I also have TX-11a tuner and a DTL-200MK2 CD player. Non-Carver equipment include a Teac X-1000r reel to reel, dbx subharmonic synthesizer, dbx dynamic range controller, dbx single ended noise reduction, and a dbx program route selector. Sadly, all this has been boxed up for 15+ years. Now that the kids are out, and have a newer home, I starting to get reacquainted with it all. As I mentioned, the C-1 and M-1.5t have been sent off for a overhaul. The DTL-200MK2 will soon follow. I finish re-coning the AT-100 woofer myself, quite pleased with the outcome. I feel I should start looking for a Carver cassette deck next... 4 2 Link to post Share on other sites
Community Admin Sk1Bum 8,617 Posted February 16 Community Admin Share Posted February 16 Hello Hal, and welcome to thecarversite.com. We're glad you're hear. There is a lot of information here, much technical know how, and a pretty good bunch of folks that are happy to help. You didn't mention names but "Chassis refresh" suggests Rolland @ Hi Tech Audio. Several here have had work done by him. I don't know of any complaints. That said, there are several very talented techs that hang out here. Once you get to Novice status, please consider uploading some pics of your gear in the Members Systems area. We all like pics of all kinds of audio gear. In the meantime, kick your shoes off, turn up the music, and welcome aboard. 2 Link to post Share on other sites
Hal 17 Posted February 16 Author Share Posted February 16 Yes, intentionally didn't mention names, as I wanted to dig around the forums first to find any additional info. I did send them off to Rolland at Hi Tech Audio. So far he has responded to all my emails within a couple of hours. Most within 30 minutes. 2 Link to post Share on other sites
Charlie 15,817 Posted February 16 Share Posted February 16 Greetings @Hal We're glad to have you aboard!!! 2 Link to post Share on other sites
AndrewJohn 4,454 Posted February 16 Share Posted February 16 Welcome @Hal, Rolland will do good work. There are others, too, as your OCCD takes you down the rabbit hole! Welcome to the forum, glad you found us. When you get your gear back, we love pictures ! 😉 2 Link to post Share on other sites
BluesMan57 1,021 Posted February 16 Share Posted February 16 Welcome to the forum Sir..... Glad to have you aboard 2 Link to post Share on other sites
johnrotten 957 Posted February 16 Share Posted February 16 Welcome!!! 2 Link to post Share on other sites
69Chevelle 263 Posted February 16 Share Posted February 16 Welcome Hal, glad to have you on board, I started with the same C-1 and M1.5 units as you right about the same timeframe as well. Happy to hear you are getting them freshened up and ready to rock. 2 Link to post Share on other sites
Rob 2,226 Posted February 16 Share Posted February 16 Welcome Hal to the Carver site. I too started my Carver path while single in the Army. (Bamberg) 1987 - 1990. This a great place to be. Enjoy!!! 2 Link to post Share on other sites
Dadvw 2,317 Posted February 16 Share Posted February 16 Welcome Hal! You have a nice collection of gear there, especially the reel to reel. I would love to have one of those models fully refreshed but I don’t have the space for one. You will enjoy your gear when it gets back home. It will sound great and last for many years. We have several good techs here that do great work. Depending on where you live, it might save you some shipping costs. Take a look around and we hope you enjoy the site. 1 Link to post Share on other sites
Hal 17 Posted February 16 Author Share Posted February 16 (edited) @Rob I was stationed at Spangdahlem AB at the same you were at Bamberg. Edited February 16 by Hal 1 1 Link to post Share on other sites
PMAT 1,437 Posted February 16 Share Posted February 16 Welcome to the Carver madness. Make yourself at home. Very few alligators around here. Share some pictures when you can. 2 Link to post Share on other sites
Daddyjt 6,287 Posted February 16 Share Posted February 16 Hey Hal - welcome aboard! not sure what part of Utah you are in, but there’s a nice little (3) cadre of us up around the Layton area. In fact, we got together yesterday fao a fun listening session and good conversation:-) 2 Link to post Share on other sites
Hal 17 Posted February 16 Author Share Posted February 16 @Daddyjt What a small world!! I'm in Hooper... Link to post Share on other sites
bfg4wd 111 Posted February 17 Share Posted February 17 Welcome to the forum 1 Link to post Share on other sites
aceman117 696 Posted February 17 Share Posted February 17 Welcome, Hal! 1 Link to post Share on other sites
TJActual 75 Posted February 18 Share Posted February 18 Welcome aboard. It a really great place with tons of knowledgeable people willing to help. 1 Link to post Share on other sites
B-Man 3,356 Posted February 18 Share Posted February 18 Welcome to the asylum. Glad you came in - did you hear the door lock behind you ? You're stuck now so make yourself at home, buy a lot more Carver gear, post some pictures of it and enjoy the interaction with all of the whack jobs that call this place home. 🙂 1 2 Link to post Share on other sites
Hal 17 Posted February 18 Author Share Posted February 18 @Daddyjt What a small world!! I'm in Hooper... Link to post Share on other sites
Hal 17 Posted February 18 Author Share Posted February 18 @B-Man why does your comment remind me of Hotel California? 😆 Link to post Share on other sites
Dennis47 579 Posted February 18 Share Posted February 18 WELCOME @Hal! Like your combination of C-1, M-1.5t and Cerwin Vegas! And that Teac X-1000r R/R is a keeper.................... 1 Link to post Share on other sites
Receiver2000 904 Posted February 19 Share Posted February 19 Welcome Hal, great to have you with us. Great group of guys who know alot and are real fun to hang with. 1 Link to post Share on other sites
Balok 1,151 Posted February 19 Share Posted February 19 Open the CarverSite! bay doors please HAL. 2 2 Link to post Share on other sites
Blueprintt 20 Posted February 19 Share Posted February 19 Welcome Hal! I just joined this site on Feb 3 and also have a C-1 and M1.5t in need of a refresh. I’ll keep an eye on how it goes for you while I continue to absorb as much as I can from the wealth of knowledge on this site. 3 1 Link to post Share on other sites
Brian_at_HHH 1,990 Posted February 19 Share Posted February 19 Welcome to the site, @Hal, and I think I may have missed a welcome to @Blueprintt along the way as well. It seems that both of you are well and truly infected with OCCD, so I can't offer any worthwhile warnings about it's perils to either of you. Hal, you had the good sense to get things refreshed. Regardless of where or who, with your equipment having been boxed up for a while, that was a very wise move. Also good for you for getting back into it. Refreshed Carver equipment can stand up against almost anything short of equipment in the megabucks range, and somethings hold it's ground there, really well, too. Should it be necessary, there are certainly people, here, who are more than qualified to refresh or fix virtually anything bearing Bob Carver's name. The fellow who runs the site @Nahash5150 at Nelion Audio being a perfect example. Remember to post some pictures of your systems when you can. And remember to enjoy the music, 2 Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now