Esprit 30 Posted April 16, 2021 Share Posted April 16, 2021 Hello, It's a pleasure being here after owning a MXR-130 and Polk Monitor 5's since 1984. Recapped and reflowed it continues to work great. Will replace other items for continued reliability. Obtained 2 more which have various needs, from relays on one, to many failed components on the other. I also have two Yamaha M-50's that have the X-power supply similar to the Carver units. Repaired one, the other is confounding. I look forward to tapping the wealth of knowledge here. Cheers, Lee 8 Link to comment Share on other sites More sharing options...
Sk1Bum 9,881 Posted April 16, 2021 Share Posted April 16, 2021 Hello Esprit, and welcome to thecarversite.com. We're glad you're hear. There is a lot of information here, much technical know how, and a pretty good bunch of folks that are happy to help. The Carver receivers are popular here. There are several members that have refreshed MXR receivers and they're very happy with them. Once you get to Novice status, please consider uploading some pics of your gear in the Members Systems area. We all like pics of all kinds of audio gear. In the meantime, kick your shoes off, turn up the music, and welcome aboard. 1 Link to comment Share on other sites More sharing options...
BluesMan57 1,307 Posted April 16, 2021 Share Posted April 16, 2021 Welcome to the Forum..... Glad to have you aboard..... 1 Link to comment Share on other sites More sharing options...
Community Admin AndrewJohn 8,165 Posted April 16, 2021 Community Admin Share Posted April 16, 2021 Welcome to TheCarverSite!, @Esprit. Glad you found us ! 1 Link to comment Share on other sites More sharing options...
Charlie 16,429 Posted April 16, 2021 Share Posted April 16, 2021 Happy to have you onboard! Enjoy your stay!!! 1 Link to comment Share on other sites More sharing options...
Hal 35 Posted April 16, 2021 Share Posted April 16, 2021 Welcome to the site! 1 Link to comment Share on other sites More sharing options...
DrummerJuice 1,278 Posted April 16, 2021 Share Posted April 16, 2021 Welcome Esprit! I hope your name comes from the Lotus you have in the garage!😜 1 Link to comment Share on other sites More sharing options...
PMAT 1,841 Posted April 17, 2021 Share Posted April 17, 2021 Thanks for joining us. Make yourself at home and dive right in to the fray. Cheers 👍 1 Link to comment Share on other sites More sharing options...
Dennis47 854 Posted April 17, 2021 Share Posted April 17, 2021 WELCOME @Esprit! Always great to have new members. Caver and Polk are a good match. Do your M-5s have the Peerless tweets? 1 Link to comment Share on other sites More sharing options...
Brian_at_HHH 2,609 Posted April 19, 2021 Share Posted April 19, 2021 Welcome to the group, Lee!! There are certainly plenty of folks, here who are happy to share their knowledge & wisdom, though I will except, myself, WRT the actual electronics. 1 Link to comment Share on other sites More sharing options...
Receiver2000 2,463 Posted April 19, 2021 Share Posted April 19, 2021 Welcome Lee!!!! Great to have you. 1 Link to comment Share on other sites More sharing options...
Dadvw 2,805 Posted April 19, 2021 Share Posted April 19, 2021 Welcome Lee! Glad to have you aboard the Carver train! Plenty of us OCCD people here and most of us are good enablers when it comes to Carver and other gear. We hope you enjoy the new site! 1 Link to comment Share on other sites More sharing options...
Esprit 30 Posted April 28, 2021 Author Share Posted April 28, 2021 Good morning and thank you all for a such a warm welcome! I like the Latin version of 'don't let the bastards grind you down' A favorite of mine.👍 DrummerJuice you nailed it. I have two Esprits, an '85 and '89. Acquired a basket case '70 Europa S2 a few days ago. I run a Import repair (Esprit Motorsports) by myself and do all my own work, so it makes it all possible. Dennis47. I listened to many speakers with the Carver before buying the Polk Monitor 5's. they put many more expensive speakers to shame. Both sets have the SL-2000's. Brian_at_HHH. I have a cat named Jet just like yours. Funny creatures! 2 1 Link to comment Share on other sites More sharing options...
Esprit 30 Posted April 28, 2021 Author Share Posted April 28, 2021 Update on the equipment: In the Yamaha M-50 I found a broken wire in the transformer after being told they never go bad... It's now working very well. I will make any adjustments necessary once I learn how. The other will get the same. I am a fan of these power supplies and had to see how Yamaha did it and lost out to Carver in the process. These particular amps have extremely good numbers. I would like to find a couple M-70's that need work. I have three MX-130's. All parts arrived for them. Bought relays in bulk! The last one suffered an unfortunate event. I was troubleshooting it and a previously hidden metal spacer fell into an output transistor 2SC1320 taking it and two drive transistors out along with three resistors, one of which burned in a spectacular fashion! After replacing all known bad parts,I powered it up carefully with a 1946 vintage variac and all power supply rails were normal. I planned on replacing the two larger transistor complements prior to listening, but as an experiment, decided to listen to it. Despite the 'mismatched' transistors it sounds fantastic. No adjustments were made. Like the Yamahas I need to learn how to adjust all aspects before turning anything. If all goes well I will gift one Carver and set of Polks to my son when he gets winged as an NFO in July. He really appreciates the originals. I may put one Carver in the garage so I'll need more speakers. I would like to find a Carver M-400 and a Yamaha B-6 that need work for a real challenge. 1 2 Link to comment Share on other sites More sharing options...
Sk1Bum 9,881 Posted April 28, 2021 Share Posted April 28, 2021 I used a Yamaha C-85 pre and T-85 tuner for years with a pair of M-400ts and later with a pair of M1.0ts. I still have the Yamaha gear. 1 Link to comment Share on other sites More sharing options...
Esprit 30 Posted April 28, 2021 Author Share Posted April 28, 2021 If it weren't for the 'Sony Bond Glue' issue, I believe the Yamahas would be taken more seriously. Fortunately It isn't a problem in the M-50's. I have my eye on an M-85. That series is very robust. More importantly I may be acquiring a 4th MX-130. I'm sure it won't be my last! 1 Link to comment Share on other sites More sharing options...
oakley104 622 Posted April 28, 2021 Share Posted April 28, 2021 Welcome to the TCS site !! Looks like your well on your journey... Lots of great info and people here to help you along your never ending audio journey.. 1 Link to comment Share on other sites More sharing options...
The Raven 455 Posted May 3, 2021 Share Posted May 3, 2021 Welcome aboard! Link to comment Share on other sites More sharing options...
DrummerJuice 1,278 Posted May 4, 2021 Share Posted May 4, 2021 On 4/28/2021 at 5:02 AM, Esprit said: DrummerJuice you nailed it. I have two Esprits, an '85 and '89. Acquired a basket case '70 Europa S2 a few days ago. I run a Import repair (Esprit Motorsports) by myself and do all my own work, so it makes it all possible. Very Cool! Have you converted one in to a submarine yet? 1 Link to comment Share on other sites More sharing options...
Esprit 30 Posted May 4, 2021 Author Share Posted May 4, 2021 21 minutes ago, DrummerJuice said: Very Cool! Have you converted one in to a submarine yet? Hahahaha! not yet. I've taken 700 lbs out of The '85 so it wouldn't stay underwater very well anyway! Plus been too busy buying and fixing all the Carver M-XR-130's and Yamaha amps I can get my hands on. It's really a disease. I've had a great deal of luck working on the Europa. Engine was seized solid from rust and I got it running within 24 hours of it being unloaded. Doesn't smoke one bit. 13 hours ago, The Raven said: Welcome aboard! Thank you! I would like to just hang out here all day (and night) On 4/28/2021 at 2:49 PM, oakley104 said: Welcome to the TCS site !! Looks like your well on your journey... Lots of great info and people here to help you along your never ending audio journey.. Never ending is most appropriate! Thanks! 2 Link to comment Share on other sites More sharing options...
DrummerJuice 1,278 Posted May 4, 2021 Share Posted May 4, 2021 1 hour ago, Esprit said: I've had a great deal of luck working on the Europa. Engine was seized solid from rust and I got it running within 24 hours of it being unloaded. Doesn't smoke one bit. I've always been a fan of the Exige! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now