Jeff F 13 Posted October 17, 2023 Posted October 17, 2023 I'm the original owner of the one of the TFM-35X and A-760x. The other TFM-35(X)s have been nursed back to health except of the one X that started on fire - it's almost back except for a DC offset on the output. That unit has been through a lightning strike and repair but other issues soon surfaced and hence the fire lol. Currently, have the M1.5T showing life (after a butcher job) but it's in ICU - getting some output but one channel is really limited. I'm looking for some help in finding how to perform the bulletin upgrade for the "speaker thump". Any help would be greatly appreciated. Thanks!! Jeff 5
BobTFM35 2,574 Posted October 17, 2023 Posted October 17, 2023 @Jeff F Welcome to the Carver Site. Like your collection of amps and hope the two come back strong. What kind of preamp(s) are you using? 1
Dadvw 2,865 Posted October 18, 2023 Posted October 18, 2023 Welcome friend to the Carver show that never ends, were so glad you could attend, come inside come inside........🙂 1 1
Community Admin AndrewJohn 10,022 Posted October 18, 2023 Community Admin Posted October 18, 2023 Welcome @Jeff F, glad you found us! Can't wait to see a picture of your gear! 1
jeffs 3,203 Posted October 18, 2023 Posted October 18, 2023 22 hours ago, Jeff F said: almost back except for a DC offset on the output If the DC is high yet reasonable (under 60mV or so), check the input AC coupling capacitors for shorts. Many models this is 470uF, but others have 220uF. 22 hours ago, Jeff F said: I'm looking for some help in finding how to perform the bulletin upgrade for the "speaker thump". For which model? The m1.5t does not have a thump fix bulletin. It's one of only a few models (m400 series) that does not have a power switch. It's "instant on" as soon as it's plugged in. 2
radtraveller 276 Posted October 19, 2023 Posted October 19, 2023 Put in a dedicated 20 amp circuit (or 3-4) in with their own nice wall switch… 2 amplifiers per circuit. ?? Dang.. would need a new panel… Never mind….. 1
Kurt 2,519 Posted October 20, 2023 Posted October 20, 2023 Welcome to the Carver Site! You have some great gear, there!
Jeff F 13 Posted October 20, 2023 Author Posted October 20, 2023 On 10/17/2023 at 7:00 PM, BobTFM35 said: @Jeff F Welcome to the Carver Site. Like your collection of amps and hope the two come back strong. What kind of preamp(s) are you using? 2
Jeff F 13 Posted October 20, 2023 Author Posted October 20, 2023 Just now, Jeff F said: An Onkyo TX-ZR50 which I like but was not my 1st choice - only thing I could get my hands on during COVID-19 that wasn't crazy $$ or out of stock/discontinued. 2
Jeff F 13 Posted October 20, 2023 Author Posted October 20, 2023 On 10/18/2023 at 12:45 PM, jeffs said: If the DC is high yet reasonable (under 60mV or so), check the input AC coupling capacitors for shorts. Many models this is 470uF, but others have 220uF. For which model? The m1.5t does not have a thump fix bulletin. It's one of only a few models (m400 series) that does not have a power switch. It's "instant on" as soon as it's plugged in. 2
Jeff F 13 Posted October 20, 2023 Author Posted October 20, 2023 Thanks for the tip on the DC offset and the info on the M1.5T bulletin (that doesn't exist). No wonders I could not find it ... lol. Read somewhere that there was ... now I know ! Jeff 2
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now