Hi from Hsv

[JayBee 5]

New to the site, but a long-time Carver user, M1.5t, TFM-6CB, TFM-15, CT-17. Need some help resurrecting a TFM-6CB.

[Receiver2000 5,366]

Welcome!!!! Glad that you are here.

 

Not me, but plenty of knowledge around these parts to help with your resurrection. 

[Rob 6,890]

Welcome to the site!

[Half Life 1,912]

Welcome from Virginia!  Enjoy your stay.

 

You can find the manuals for your gear at the top under Manuals and Specsheets.

[Jeff Stone 500]

Welcome to TCS! If you DIY, there's plenty of knowledge and kind folks to share it with you. I suggest Nelion Audio if you wish to have it worked on. And by all means share some pcs of your setup and gear! Love pics and good luck with your TFM-6CB

[BobTFM35 3,436]

@JayBee Welcome to the Carver Site!!

 

Downloading the service manual shown in our database will get you a schematic of the 6cb. Its shown on two individual pages. It doesn't look like any information is missing from each of the pages.

 

If you wish a continuous scan of the schematic you can download the very same manual from either of these two sites.

 

https://www.scribd.com/document/723336078/Carver-Tfm-6c-Sm

 

This one should download automatically

https://audiocircuit.dk/downloads/carver/Carver-TFM6C-pwr-sm.pdf

 

Or if you prefer to look over the Carver list on their site use this link below. They contain just about the same information that is available here.

 

https://audiocircuit.dk/carver/

 

And a host of other manufacturers information here,

 

https://audiocircuit.dk/download/#google_vignette

 

Good luck resurrecting the TFM-6CB.

 

For Hsv,

I get Huntsville International Airport in Alabama (HSV)? Thus Huntsville Alabama area.

Edited 2 hours ago by BobTFM35

[Sk1Bum 13,854]

Hello JayBee and welcome to thecarversite.com. Glad you found us!

 

TFM amps are popular here, and @BobTFM35 pointed you in the right directions.