BobTFM35

Great advice from @Rob to touch base with Greg. This link has a pot from a different unit but has the same rating as what is used in the 130. It might be a candidate to keep in mind if all else fails. https://www.ebay.com/itm/166807640176?

@Alfa_Metal Welcome to the Carver site! Did the pot in question have any markings on it, like 150KBX2?

Welcome to the Carver Site.

Welcome to the site @Andy Judd I was curious if the user manual could shed some light on what the problem with your unit could be. I have no experience with this unit, and this is only a stab in the dark. Look at and read "Front Panel Features" Number 1 Power Switch. It indicates that when the Standby LED blinks for 5 seconds its muting and waiting for the power supply to stabilize after which the speaker relays kick in and you will hear music. Something up with the power supply and or relays not working properly? I would also go to the "IN CASE OF DIFFICULTY PAGE" Kind of implying that something might be up with the speakers. Wish you well in finding the problem.

Playlist up till now, Presenting Cannonball J.J. Johnson and Nat Adderley, Chain Reaction Adderley and Evens, Know what I mean? Nat Adderley and Johnny Griffin, The three sounds. The Cannonball Adderley Quintet, Country Preacher

I agree!

Going to be looking for this CANNONBALL ADDERLEY - POPPIN' IN PARIS: LIVE AT L'OLYMPIA 1972 released April 26, 2024

@Sk1Bum @Receiver2000 After a Great afternoon of the Rippingtons, I thought that I would dedicate today to Julian Cannonball Adderley and his younger brother Nathaniel Carlyle Adderley. Starting things off with,

It sure was.

@Sk1Bum Based on your posting of Russ Freeman, Nocturnal Playground, it inspired me to have a Rippington afternoon. Play list so far is. Russ Freeman, Nocturnal Playground along with the following, Moonlighting Kilimanjaro Tourist in Paradise Welcome to the St. James' Club Curves Ahead Weekend in Monaco Sahara

@bigeyesteve Given that you have reached "Novice Status" and have enough likes you should be able to post pictures of your gear. Looking forward to seeing your gear.

In the truck its Sirius satellite radio, and at home it's a combination of CD, Vinyl, or FLAC files.

Welcome!

Welcome!!

@brjoon1021 Welcome to the Carver site!! Nice to have another DTL user. I currently run and select between three digital sources that use my DTL. I accomplish this by using a dbx 200X. Each of the digital sources are connected to the tape deck 1,2, and 3 IN tape jacks. Don't need to connect to the out on the dbx since I'm not recording on any of the CD players. The Carver DTL is hooked up to Sound Processor loop #1 utilizing both the in and out connection. Your preamp is hooked up to the LINE out on the dbx to the preamp in connection, I used the CD input on my Marantz. If you look into a dbx unit make sure that it has jumpers on the encoder and decoder connections like in the below picture. They are necessary to have unless you are using an encoder and decoder in your setup. There is a switch, BYP (bypass), on the front of the dbx unit that allows you to have the DTL in or out of the signal path. Prior to deployment of the dbx unit into my system I cleaned all the switches and checked every solder joint. The nice thing is that it has no plug nor power supply at all. And that's the way to share three digital sources with one DTL. Hopefully this helps. Ps, download the DTL manual found on our site. It states that the DTL needs to be installed between the CD player and the preamp. The manual for the dbx unit is available here, https://www.hifiengine.com/manual_library/dbx/200x.shtml

Welcome! Looking forward to hearing more about your gear.

Welcome to the Carver Site!!

Welcome to the Carver site. Nice list of gear. Looking forward to seeing pictures. No better time than the present to get started with your amp updating journey.

Welcome to the Carver site. In addition to reaching out to Nelion for your amp, and if Greg doesn't do repairs on tuners I might also contact Rolland Barr at https://carveraudiorepair.com/serv.html for your tuner. Good luck on getting your gear back to operational condition.

Welcome to the site. Looking forward to hearing more.

@Lyn First, think about posting your introduction here https://thecarversite.com/forum/142-the-welcome-shop-please-read-first/ as it will help you to advance past the "inbound" status. The following is just one option that I know of. Add to the cost of a 4000/4000t the following For the 4000/4000t Restore Price: $450 Gundry Filter for Sonic Holography: $60 Signal Path Upgrade: $100 LED color change: $50 Remote control Volume: $175 IEC socket: $50 Comes with Nelion Audio 3 year parts and labor warranty. As you already have a C-1 add the following C-1 Restore Price: $250 Restore Price with BillD upgrade: $420 Remote volume mod: $175 Gundry Filter: $50 IEC socket (polarized C8): $50 Custom LED color: Free Comes with the Nelion Audio 3-year warranty. This information comes from here, https://nelionaudio.com/index.php?/services.html/carver/carverpreamps/ Plus any shipping costs.