tlkohler 106 Posted April 14, 2013 Share Posted April 14, 2013 Good morning all After about 25 years in cardboard isolation, I'm breaking my Carver system out of storage in the hopes of returning it to use. Since I found this forum site a month ago, I've been consuming as much info as possible and have been reading over all the topics (unfortunately it's pretty much consumed me). I hope I didn't muck up procedure with just now making the posting to the "Welcome wagon" page. Thanks for making this available to a newbie site participant but long time Carver enthusiast. Terry Link to comment Share on other sites More sharing options...
BluesMan57 1,309 Posted April 14, 2013 Share Posted April 14, 2013 Welcome to the forum Terry. Glad to have you.............. Link to comment Share on other sites More sharing options...
zumbini 6,140 Posted April 14, 2013 Share Posted April 14, 2013 Welcome to the forum Terry. You found the right place for all things Carver. I suggest a visual inspection of the interior before powering up, especially the amp(s). Look for leaking or bulging capacitors and DO NOT power up if you find any. Good luck resurrecting your system! Post some photos when you get a chance please. Link to comment Share on other sites More sharing options...
Belvedere2 170 Posted April 14, 2013 Share Posted April 14, 2013 Welcome. Photos are good unless they come out like mine. Link to comment Share on other sites More sharing options...
tlkohler 106 Posted April 14, 2013 Author Share Posted April 14, 2013 Welcome to the forum Terry. You found the right place for all things Carver. I suggest a visual inspection of the interior before powering up, especially the amp(s). Look for leaking or bulging capacitors and DO NOT power up if you find any. Good luck resurrecting your system! Post some photos when you get a chance please. Excellent suggestion. I did look inside my original purchase M-500t and the one I acquired resently from an ebay buy. Both appeared to be okay so I did power on the amps. At that point, Nahash was kind enough to accept my request to refurb them both. They are currently with him awaiting his magic. My C-1 preamp is going to be heading to Wayne for his touch sometime early this coming week. I neglected to get a shot of the full system prior to breaking it back down. There is a 11a tuner, TL-3300 CD player and an additional M-1.5t amp that round out the Carver part of my system. Dbx and BSR sound processing units round out the non-carver stuff from the 80's. Once those pieces are back in place I'll get a full system pix posted along w status. Link to comment Share on other sites More sharing options...
zumbini 6,140 Posted April 14, 2013 Share Posted April 14, 2013 You are in good hands with Greg and Wayne. Both know Carver inside and out and do excellent work. Your CD player will probably need new tray and sled drive belts but replacement is pretty easy. I posted a how to for the DTL-series player that should be helpful HERE. We don't have your belt spec listed in our database but there's a primer for measuring belts HERE. (Once you know the dimensions please post them so I can update the CD player belt size chart.) 1 Link to comment Share on other sites More sharing options...
Daddyjt 8,645 Posted April 14, 2013 Share Posted April 14, 2013 Welcome Terry! Glad to have you here. You're going to have no shortage of power, when Greg gets done with your amps. Are you having him do the mkII mods? What are you going to be driving with them? As Dom said, we LOVE pictures...:-) Link to comment Share on other sites More sharing options...
BarryG 2,846 Posted April 14, 2013 Share Posted April 14, 2013 Welcome Terry, you have found a wonderful place to be. These guys will answer quetions for you. Greg is very helpful with a refurb or an upgrade. It is great to meet others who share in OCCD! Link to comment Share on other sites More sharing options...
weitrhino 1,425 Posted April 14, 2013 Share Posted April 14, 2013 Geez Terry, dive in why dontcha? Guy brings out his Carver equipment after 25 years of storage and goes straight for the Mk II and BillD mods. Sounds like a guy I'd like to know. Welcome. Link to comment Share on other sites More sharing options...
Gene C 1,745 Posted April 14, 2013 Share Posted April 14, 2013 Welcome to the site Terry. Link to comment Share on other sites More sharing options...
dennismiller55 4,717 Posted April 14, 2013 Share Posted April 14, 2013 Welcome! Link to comment Share on other sites More sharing options...
tlkohler 106 Posted April 14, 2013 Author Share Posted April 14, 2013 You are in good hands with Greg and Wayne. Both know Carver inside and out and do excellent work. Your CD player will probably need new tray and sled drive belts but replacement is pretty easy. I posted a how to for the DTL-series player that should be helpful HERE. We don't have your belt spec listed in our database but there's a primer for measuring belts HERE. (Once you know the dimensions please post them so I can update the CD player belt size chart.) Both gentlemen have been nothing but gracious with my request(s) so far. I just didn't feel confident in tackling the soldering tasks and that was why I begged for newbie help (I know nothing of the electronics workings of the pieces - I just know I remember how they used to sound and in what I've read here how great they'll sound once rehab'd). The CD player did work and while I didn't listen extensively I did take the time to play about a dozen different discs partially. Since all rubber goods have a shelf life I would expect the belts to be a weak point here and I'll inspect them very soon. Once I do I'll post what I find. Link to comment Share on other sites More sharing options...
tlkohler 106 Posted April 14, 2013 Author Share Posted April 14, 2013 Welcome to the forum Terry. Glad to have you.............. ... good to be here and thanks for the welcome. Link to comment Share on other sites More sharing options...
tlkohler 106 Posted April 14, 2013 Author Share Posted April 14, 2013 Welcome Terry! Glad to have you here. You're going to have no shortage of power, when Greg gets done with your amps. Are you having him do the mkII mods? What are you going to be driving with them?As Dom said, we LOVE pictures...:-) Yes mkII mods. My two channel setup (music listening) consists of a pair of Polk Audio Monitor 75t 4-way ported floorstandings along with a Polk PSW505 subwoofer. For HT movie viewing, I use Definitive Technology Mythos XTR-60's for L&R, XTR-50 Center, 2-XTR-50's rear Surround and a DT SuperCube III sub. Back in the 80's my vintage speakers were a pair of BSR's (don't remember the model) that had some ungodly sized woofer (12 or 15") ... haha, bigger was always better then. Link to comment Share on other sites More sharing options...
tlkohler 106 Posted April 14, 2013 Author Share Posted April 14, 2013 Welcome! Thank you Dennis Link to comment Share on other sites More sharing options...
tlkohler 106 Posted April 14, 2013 Author Share Posted April 14, 2013 Welcome Terry, you have found a wonderful place to be. These guys will answer quetions for you. Greg is very helpful with a refurb or an upgrade. It is great to meet others who share in OCCD! Thanks for the welcome Barry, both Greg and Wayne have been very generous with their time and knowledge. OCCD - Yes that's always been my problem (if you want to look at it that way). All in or nothing I say ... haha Link to comment Share on other sites More sharing options...
Nahash5150 10,013 Posted April 14, 2013 Share Posted April 14, 2013 Terry - your 500t's are gorgeous. Aside from a gouged corner on one of them, they are in perfect condition! I've never seen 500t's that look this good when I get them. Link to comment Share on other sites More sharing options...
tlkohler 106 Posted April 14, 2013 Author Share Posted April 14, 2013 Terry - your 500t's are gorgeous. Aside from a gouged corner on one of them, they are in perfect condition! I've never seen 500t's that look this good when I get them. Thanks Greg. I'm pretty anal with care of equipment I own from new but the ebay buy was a crap shoot. I did the best I could via the posted pictures. Link to comment Share on other sites More sharing options...
Blues Pwr 765 Posted April 14, 2013 Share Posted April 14, 2013 Welcome to the forum Terry, glad you found us, and decided to join in on the fun. You are going to be really surprised when you get your system back together. What types of music and bands/artists do you listen to ? Link to comment Share on other sites More sharing options...
tlkohler 106 Posted April 14, 2013 Author Share Posted April 14, 2013 Blues ... I'm most happy listening to true classic rock (Stones, Zep, Aerosmith -old stuff) but I will put my ear to anything. Well, anything, but classical music - I guess I just have no taste. Link to comment Share on other sites More sharing options...
Nahash5150 10,013 Posted April 14, 2013 Share Posted April 14, 2013 You just have to know what to look for in classical. Modern interpretations are so mechanical because the music is extremely difficult, but there are some masters out there that blow the shit out of the water and play it the way it was intended. So here's Bach singing to God with his genius, as interpreted by the late master, Rostropovich. (this guy wipes the floor with Yo-Yo Ma, just sayin) Link to comment Share on other sites More sharing options...
tlkohler 106 Posted April 14, 2013 Author Share Posted April 14, 2013 Thanks for the enlightenment. Always good to broaden your horizons. Link to comment Share on other sites More sharing options...
helicopter pilot doug 110 Posted April 14, 2013 Share Posted April 14, 2013 Welcome Terry Link to comment Share on other sites More sharing options...
tlkohler 106 Posted April 14, 2013 Author Share Posted April 14, 2013 Thanks Doug glad to be here. Lots of technical knowledge here and some passionate discussions as well. Very nice site. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now