Gene C 1,748 Posted February 6, 2015 Posted February 6, 2015 Hey guys wanted to make the intro for my friend Chris who is a local wiz when it comes to working on audio gear. So Chris how bout filling the crew in on who you are and what you do. And thanks for signing up on the forum. 2
PMAT 2,041 Posted February 6, 2015 Posted February 6, 2015 Welcome Chris, It's great to have you aboard. 1
Buzztech 12 Posted February 6, 2015 Posted February 6, 2015 Well ive been the repair business for almost 30 years now, and have been in the process of starting my own business called Buzz Technical, for the last two years. I am skilled in all types of electronics repair. But am specializing in high end and pro audio. I can fix most anything as long as the parts can be obtained, and have been known to manufacture them when the need arises. I have a need for quality and a passion for perfection. There is no half way in my book. Only the best will do. If theres anything i can do to help. Just ask and ill do my best to help out. 7
Buzztech 12 Posted February 6, 2015 Posted February 6, 2015 Thanks guys. Im a bit new to this format. But ill try and help out the best i can.
BillWojo 542 Posted February 6, 2015 Posted February 6, 2015 Hi Chris, welcome to the forum. Hang out a while, good bunch of folks here. BillWojo 1
loner_t 2,568 Posted February 6, 2015 Posted February 6, 2015 Welcome Chris! Hope you are afflicted with OCCD (we all are) and have been introduced by Gene to the vast array of Carver manuals.
Buzztech 12 Posted February 6, 2015 Posted February 6, 2015 I was going to mention that, lol. My OCD makes me work some long hours. You will never find an extra screw left over in my shop. lol
Gene C 1,748 Posted February 6, 2015 Author Posted February 6, 2015 You will never find an extra screw left over in my shop. lolLet me know if you need any, I have a few loose ones rolling around over here. 1
Buzztech 12 Posted February 6, 2015 Posted February 6, 2015 Ha ha. Dont get me wrong. I have buckets of them. For spares. But if for some reason i find one left over from a job. Theres no way to keep my self from finding out where it was supposed to be. Or it will drive me nuts.
Blues Pwr 766 Posted February 6, 2015 Posted February 6, 2015 Chris, welcome to the forum. Gene has spoken highly of you. Please tell us about your system, I'm sure its in a constant state of change, with all the gear you see coming and going through your shop.
Buzztech 12 Posted February 6, 2015 Posted February 6, 2015 Well i do my best to give as acurate of an estimate asap. And get the unit done within a few days. Even if im up late. Dealing with a lot of pro audio equipment and musician equipment. I have to keep up on things. And i try to get them done in a timely manor. I have a large parts stock so i can usually get it handled. But there are times when i have to order something and that is the only reason there is ever a delay. I have a complete test setup with all the tools i need as well as an audio load for burn in. And tube testing equipment, so i can take on just about any challenge. And so far. Ive been doing really good. My experience speaks for it self.
fill35U 1,846 Posted February 6, 2015 Posted February 6, 2015 Welcome to theCarversite, Chris! We've seen the fine work you've done on Gene's gear. What kind of system do you run for yourself? 1
zumbini 6,147 Posted February 6, 2015 Posted February 6, 2015 Howdy Chris. Nice to have you on board. Dilligent and capable techs are always welcome. Tell us more about yourself. Do you listen to music while you're working or at home? Who are you're favorites artists? What gear do you run in your personal audio system? Photos are always appreciated! 1
Daddyjt 9,619 Posted February 6, 2015 Posted February 6, 2015 Welcome aboard Chris! Always nice To have another experienced soldering iron in the crew;-) I must say, as many times as Gene has made me get MY wallet out, it's nice to meet someone that gets into HIS wallet for a change!! Congrats on starting your own business! Hope you enjoy the site and the company. 1
Sagamore2007 71 Posted February 6, 2015 Posted February 6, 2015 Welcome to the forum, Great folks here ! Attention to Detail, like my father told me "Do a Job, Big or Small, Do it Right or not at all" 1
dcl 3,276 Posted February 6, 2015 Posted February 6, 2015 Welcome aboard, Chris. Electronics & repair are not my strong suit so I am appreciative of members who are generous in their assistance. ps: We love pics of work benches, too. 1
BluesMan57 1,411 Posted February 6, 2015 Posted February 6, 2015 Welcome to the forum Chris . Glad to have you. 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now